Firewood heat value: how much heat beech, oak, birch and spruce give
Heat value tells you how much heat you get from burning a certain amount of fuel. With wood you need to tell two things apart: heat value per kilogram and the heat value per stere. This is exactly where people get confused most often when buying.
Per kilogram almost every wood gives the same heat
A kilogram of seasoned wood gives roughly the same amount of heat, whether it is beech or spruce. For ordinary firewood with about 20% moisture the usual figure is roughly 14 to 15 MJ/kg, which is about 4 kWh. Moisture matters most: the more water the wood contains, the less heat you get per kilogram. Why that is so is explained in the article Seasoned or wet firewood.
Per stere the wood types differ a lot
But you do not buy wood by the kilogram, you buy it by the metre. And a metre of hardwood weighs much more than a metre of softwood. A stere of beech or oak with about 15% moisture weighs roughly 470 to 480 kg, the same stere of spruce only about 320 kg. That is why a metre of hardwood gives you noticeably more heat.
| Wood type | MJ per stere | kWh per stere |
|---|---|---|
| Acacia | 8 030 | 2 230 |
| Oak | 7 430 | 2 060 |
| Hornbeam | 7 400 | 2 060 |
| Beech | 7 320 | 2 030 |
| Birch | 7 100 | 1 970 |
| Spruce | 5 440 | 1 510 |
Approximate values for a stere (stacked cubic metre) of wood with about 25% moisture. Conversion: 1 kWh = 3.6 MJ. The real value depends on moisture and how tightly the logs are stacked.
What the chart means when you buy
- Acacia, oak, hornbeam and beech give the most heat per metre and burn for a long time. They suit heating all season in stoves and boilers.
- Birch is only slightly weaker, lights easily and burns with a nice flame, which is why it is popular for fireplaces.
- Spruce gives about a quarter less heat per metre than beech. It catches quickly, so it suits kindling and the shoulder seasons.
So when comparing prices, always compare the same unit. A loose metre contains less wood than a stacked one, as we explain in the article Stere and loose cubic metre.
How to get the most heat out of wood
- burn seasoned wood, ideally with moisture below 20%,
- store wood under a roof with airflow, see how to store firewood,
- choose the log length to suit your firebox so the logs stack well,
- close the air supply only once the fire is going.
You will find hardwood with a high heat value in our range of firewood, for example acacia, oak or beech.
Need fuel? We deliver firewood, wood pellets and briquettes in Prague and the surrounding area.
Choose firewood

